Support

+41 61 361 23 23

Hersteller: Teltonika

Artikel-Nr.: TRB256000000

Bestell-Nr.: 1067256

Industrielles NB-IoT-Gateway

TRB256

Das TRB256 ist ein industrielles 4G LTE NB-IoT-Gateway, das für den Einsatz in einer Vielzahl von IoT-Lösungen entwickelt wurde. Das Gerät verfügt über mehrere WAN-Schnittstellen wie I/Os, RS232, RS485, einen Ethernet-Port sowie Dual-SIM-Funktionalität für kontinuierliche Konnektivität. Dieses industrietaugliche Gateway unterstützt auch das 450-MHz-Frequenzband, das im Vergleich zu Standardfrequenzen eine bessere LTE-Signaldurchdringung bietet und somit eine optimale Wahl für eine Vielzahl von M2M-Anwendungen darstellt.

CHF 107.20 exkl. MwSt.

Lieferzeit: ca. 10 Werktage

Artikelnummer: 1067256 Kategorien: ,

Verfügbar bei Nachbestellung

Attibute NameAttribute Value
Mobile
Mobile module4G LTE Cat M1 up to 588 DL/ 1119 UL kbps / Cat NB2 up to 127 DL/158.5 UL kbps / Cat NB1 up to 32 DL/70 UL kbps (simultaneous operation of cellular and GNSS connectivity is not supported)
3GPP ReleaseRelease 14
SIM switch2 SIM cards / auto-switch cases: weak signal / data limit / SMS limit / on roaming / no network / network denied / data connection fail
StatusIMSI / ICCID / operator / operator state / data connection state / network type / bandwidth / connected band / signal strength (RSSI) / SINR / RSRP / RSRQ / EC/IO / RSCP / data sent/received / LAC / TAC / cell ID / ARFCN / UARFCN / EARFCN / MCC / and MNC
SMSSMS status / SMS configuration / send/read SMS via HTTP POST/GET / EMAIL to SMS / SMS to EMAIL / SMS to HTTP / SMS to SMS / scheduled SMS / SMS autoreply / SMPP
Black/White listOperator black/white list (by country or separate operators)
Band managementBand lock / Used band status display
SIM idle protection serviceWhen working with devices with two SIM slots / the one not currently in use will remain idle until the device switches to it / meaning that no data is used on the card until then
SIM PIN code managementSIM PIN code management enables setting / changing / or disabling the SIM card's PIN
APNAuto APN
BridgeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughGateway assigns its mobile WAN IP address to another device on LAN
Ethernet
Ethernet1 x ETH port / 10/100 Mbps / compliance with IEEE 802.3 / IEEE 802.3u / 802.3az standards / supports auto MDI/MDIX crossover
Network
RoutingStatic routing / Dynamic routing (BGP / OSPF v2 / RIP v1/v2 / EIGRP / NHRP) / Policy based routing
Network protocolsTCP / UDP / IPv4 / IPv6 / ICMP / NTP / DNS / HTTP / HTTPS / FTP / SMTP / SSL v3 / TLS / ARP / VRRP / PPP / PPPoE / UPNP / SSH / DHCP / Telnet / SMPP / SNMP / MQTT / Wake On Lan (WOL) / VXLAN
VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers / allowing proper routing of VoIP packets
Connection monitoringPing Reboot / Wget Reboot / Periodic Reboot / LCP and ICMP for link inspection
FirewallPort forward / traffic rules / custom rules / TTL target customisation
Firewall status pageView all your Firewall statistics / rules / and rule counters
Ports managementView device ports / enable and disable each of them / turn auto-configuration on or off / change their transmission speed / and so on
Network topologyVisual representation of your network / showing which devices are connected to which other devices
HotspotCaptive portal (hotspot) / internal/external Radius server / Radius MAC authentication / SMS authorisation / SSO authentication / internal/external landing page / walled garden / user scripts / URL parameters / user groups / individual user or group limitations / user management / 9 default customisable themes and optionality to upload and download customised hotspot themes
DHCPStatic and dynamic IP allocation / DHCP relay / DHCP server configuration / status / static leases: MAC with wildcards
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination / service / protocol or port / WMM / 802.11e
DDNSSupported >25 service providers / others can be configured manually
DNS over HTTPSDNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backupVRRP / Wired options / each of which can be used as an automatic Failover / Mobile
SSHFSPossibility to mount remote file system via SSH protocol
Traffic ManagementReal-time monitoring / wireless signal charts / traffic usage history
Security
AuthenticationPre-shared key / digital certificates / X.509 certificates / TACACS+ / Internal & External RADIUS users authentication / IP & login attempts block / time-based login blocking / built-in random password generator
FirewallPreconfigured firewall rules can be enabled via WebUI / unlimited firewall configuration via CLI / DMZ / NAT / NAT-T / NAT64
Attack preventionDDOS prevention (SYN flood protection / SSH attack prevention / HTTP/HTTPS attack prevention) / port scan prevention (SYN-FIN / SYN-RST / X-mas / NULL flags / FIN scan attacks)
VLANTag-based VLAN separation
Mobile quota controlMobile data limit / customizable period / start time / warning limit / phone number
WEB filterBlacklist for blocking out unwanted websites / Whitelist for specifying allowed sites only
Access controlFlexible access control of SSH / Web interface / CLI and Telnet
SSL certificate generationLet's Encrypt and SCEP certificate generation methods
VPN
OpenVPNMultiple clients and a server can run simultaneously / 27 encryption methods
OpenVPN EncryptionDES-CBC 64 / RC2-CBC 128 / DES-EDE-CBC 128 / DES-EDE3-CBC 192 / DESX-CBC 192 / BF-CBC 128 / RC2-40-CBC 40 / CAST5-CBC 128 / RC2-64-CBC 64 / AES-128-CBC 128 / AES-128-CFB 128 / AES-128-CFB1 128 / AES-128-CFB8 128 / AES-128-OFB 128 / AES-128-GCM 128 / AES-192-CFB 192 / AES-192-CFB1 192 / AES-192-CFB8 192 / AES-192-OFB 192 / AES-192-CBC 192 / AES-192-GCM 192 / AES-256-GCM 256 / AES-256-CFB 256 / AES-256-CFB1 256 / AES-256-CFB8 256 / AES-256-OFB 256 / AES-256-CBC 256
IPsecXFRM / IKEv1 / IKEv2 / with 14 encryption methods for IPsec (3DES / DES / AES128 / AES192 / AES256 / AES128GCM8 / AES192GCM8 / AES256GCM8 / AES128GCM12 / AES192GCM12 / AES256GCM12 / AES128GCM16 / AES192GCM16 / AES256GCM16)
GREGRE tunnel / GRE tunnel over IPsec support
PPTP / L2TPClient/Server instances can run simultaneously / L2TPv3 / L2TP over IPsec support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs / Phase 2 and Phase 3 and Dual Hub support
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
TincTinc offers encryption / authentication and compression in it's tunnels. Client and server support.
BACNET
Supported modesRouter
Supported connection typesRS485 / TCP
Configuration optionsSupport for multiple BACnet/IP interfaces / Network number assignment / Preconfigured BDT entries for BBMD (BACnet Broadcast Management Device)
OPC UA
Supported modesClient / Server
Supported connection typesTCP
MODBUS
Supported modesServer / Client
Supported connection typesRTU (RS232 / RS485) / TCP
Custom registersMODBUS TCP custom register block requests / which read/write to a file inside the router / and can be used to extend MODBUS TCP Client functionality
Supported data formats8-bit: INT / UINT; 16-bit: INT / UINT (MSB or LSB first); 32-bit: float / INT / UINT (ABCD (big-endian) / DCBA (little-endian) / CDAB / BADC) / HEX / ASCII
DATA TO SERVER
ProtocolHTTP(S) / MQTT / Azure MQTT / Kinesis
Data to serverExtract parameters from multiple sources and different protocols / and send them all to a single server; Custom LUA scripting / allowing scripts to utilize the router's Data to server feature
MQTT Gateway
Modbus MQTT GatewayAllows sending commands and receiving data from MODBUS Server through MQTT broker
DNP3
Supported modesStation / Outstation
Supported connection typesRS232 / RS485 / TCP
DLMS
DLMS SupportDLMS - standard protocol for utility meter data exchange. Support trough serial and TCP
Supported modesClient
Supported connection typesRS232 / RS485 / TCP
API
Teltonika Networks Web API (beta) supportExpand your device's possibilities by using a set of configurable API endpoints to retrieve or change data. For more information / please refer to this documentation: https://developers.teltonika-networks.com
Monitoring & Management
WEB UIHTTP/HTTPS / status / configuration / FW update / CLI / troubleshoot / multiple event log servers / firmware update availability notifications / event log / system log / kernel log / Internet status
FOTAFirmware update from server / automatic notification
SSHSSH (v1 / v2)
SMSSMS status / SMS configuration / send/read SMS via HTTP POST/GET
CallReboot / Status / Mobile data on/off / Output on/off / answer/hang-up with a timer
TR-069OpenACS / EasyCwmp / ACSLite / tGem / LibreACS / GenieACS / FreeACS / LibCWMP / Friendly tech / AVSystem
MQTTMQTT Broker / MQTT publisher
SNMPSNMP (v1 / v2 / v3) / SNMP Trap / Brute force protection
JSON-RPCManagement API over HTTP/HTTPS
RMSTeltonika Remote Management System (RMS)
IoT Platforms
ThingWorxAllows monitoring of: WAN Type / WAN IP / Mobile Operator Name / Mobile Signal Strength / Mobile Network Type
Cumulocity - Cloud of ThingsAllows monitoring of: Device Model / Revision and Serial Number / WAN Type and IP / Mobile Cell ID / ICCID / IMEI / Connection Type / Operator / Signal Strength. Has reboot and firmware upgrade actions
Azure IoT HubCan be configured with Data to Server to send all the available parameters to the cloud. Has Direct method support which allows to execute RutOS API calls on the IoT Hub. Also has Plug and Play integration with Device Provisioning Service that allows zero-touch device provisioning to IoT Hubs
AWS IoT CoreUtility to interact with the AWS cloud platform. Jobs Support: Call the device's API using AWS Jobs functionality
System Characteristics
CPUMediatek / 580 MHz / MIPS 24KEc
RAM128 MB
FLASH storage16 MB
Firmware / Configuration
WEB UIUpdate FW from file / check FW on server / configuration profiles / configuration backup
FOTAUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
Factory settings resetA full factory reset restores all system settings / including the IP address / PIN / and user data to the default manufacturer's configuration
FIRMWARE CUSTOMISATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell / Lua / C / C++
Development toolsSDK package with build environment provided
GPL customizationYou can create your own custom / branded firmware and web page application by changing colours / logos / and other elements in our firmware to fit your or your clients’ needs
Package ManagerThe Package Manager is a service used to install additional software on the device
Location Tracking
GNSSGPS. (GLONASS / BeiDou / Galileo and QZSS - under development); (simultaneous operation of GNSS and cellular connectivity is not supported)
CoordinatesGNSS coordinates via WebUI / SMS / TAVL / RMS
NMEANMEA 0183
NTRIPNTRIP protocol (Networked Transport of RTCM via Internet Protocol)
Server softwareSupported server software TAVL / RMS
GeofencingConfigurable multiple geofence zones
Serial
RS232Terminal block connector: TX / RX / RTS / CTS
RS485Terminal block connector: D+ / D- / R+ / R- (2 or 4 wire interface)
Serial functionsConsole / Serial over IP / Modem / MODBUS gateway / NTRIP Client
Input / Output
Input3x Configurable Digital Inputs / 0 - 6 V detected as logic low / 8 - 30 V detected as logic high / 1x Analog input (0 - 30 V)
Output3x Configurable Digital Outputs / Open collector output / max output 30 V / 300 mA
EventsEmail / RMS / SMS
I/O jugglerAllows to set certain I/O conditions to initiate event
Power
Connector2-pin in 16-pin industrial terminal block
Input voltage range9 – 30 VDC / reverse polarity protection / surge protection +/-1 kV 50 µs max
Power consumptionIdle: <2 W / Max: <3.5 W
Physical Interfaces
Ethernet1 x RJ45 port / 10/100 Mbps
I/O’s3 x Configurable digital I/O in 16-pin terminal block
Status LEDs3 x connection status LEDs / 3 x connection strength LEDs / 1 x power LED / 1 x Eth port status LED
SIM2 x SIM slots (Mini SIM – 2FF) / 1.8 V/3 V / double stacked SIM tray
Power1 x 16-pin terminal block
Antennas1 x SMA connector for LTE / 1 x SMA connector for GNSS
RS2324-pin in 16-pin terminal block (TX / RX / RTS / CTS)
RS4854-pin in 16-pin terminal block (D+ / D- / R+ / R-)
ResetReboot/User default reset/Factory reset button
Physical Specification
Casing materialAluminium housing
Dimensions (W x H x D)83 x 25 x 74.2 mm
Weight165 g
Mounting optionsDIN rail / wall mount / flat surface (all require additional kit)
Operating Environment
Operating temperature-40 C to 75 C
Operating humidity10% to 90% non-condensing
Ingress Protection RatingIP30
Regulatory & Type Approvals
RegulatoryCE / UKCA / EAC / RCM / CB / WEEE

Downloads

   trb256-datasheet-2024-v21.pdf

   trb256-flyer-2024-v12.pdf

Software

   Quick Start Guide für TRB256

   Firmware für TRB256

Zubehör

Abonieren Sie unseren Newsletter

Sie haben sich erfolgreich angemeldet Ops! Irgendetwas ist schief gelaufen

info@inframatic.ch

Haben Sie Fragen?

+41 61 361 23 23

Montag – Freitag: 09:00-16:00

Inframatic GmbH
Spinnlerstrasse 2
CH-4410 Liestal
www.inframatic.ch

support@inframatic.ch

© 2025 Inframatic GmbH